English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

Nanoporous Titanium (Ti) / Titanium oxide (TiO2) film electrodes were fabricated by a combined radio frequency-sputtering (RFS) / Sol-gel combustion (SGC) method and investigated with respect to its photo-anode properties of transparent conductive oxide-less dye-sensitized solar cells (TCO-less DSCs). The porous Ti layer can collect electrons from the TiO2 layer and allows the ionic diffusion of I-/I3− through the hole. The porous Ti layer with low sheet resistance (∼1.7Ω/sq.) can be prepared by substrate temperature 250oC under RF power 300W and Ar gas pressure 8 mTorr. The Ti/TiO2 layers prepared by combined RFS/SGC method show the good impedance characteristics. The efficiency (η) of prepared TCO-less DSCs sample is 5.73% [fill factor (ff): 0.76, open circuit voltage (Voc): 0.71V, short-circuit current density (Jsc): 10.61mA/cm2]

Preparation of Nanoporous Ti/TiO2 Layers Deposition by RF-magnetron Sputtering/Sol-Gel Combustion Procedure for Dye-sensitized Solar Cell