English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Zendy Open

Presents the pdf analysis as premium feature

PDF Analysis

Insights

Presents the summarisation as premium feature

Summarisation

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the zaia usage as premium feature

ZAIA

Zendy Tools

Zendy Plus

Presents the access of premium content as premium feature

Premium Content

In the experiment, a pre-denitrification biofilm reactor with polyurethane as media was used to treat synthetic wastewater, and the influence of air-liquid ratio(A/L), hydraulic loading and reflux ratio on the performance of the reactor was investigated. The experimental results indicate that, when the influent concentration of COD was 270-300mg/L, NH4+-N was 33-35mg/L and TN was 35-40mg/L, under the operating condition of the air-liquid ratio being 8:1, the hydraulic loading being 0.96m/h(HRT of 1.5h), and reflux ratio being 150%, the removal efficiency of COD, NH4+-N and TN attained to 86%, 94% and 64%, respectively. The effluent quality satisfied the discharging standard of integrated wastewater of Liaoning (DB 21/1627-2008). In the pre-denitrification biofilm reactor, COD and TN removal was mainly realized in the anoxic zone, while NH4+-N removal was mainly achieved in the oxic zone. In order to guarantee the good quality of the effluent, the COD, NH4+-N and TN loading should be controlled below 6.42, 0.71 and 0.58kg/(m3·d), respectively, and the influent COD/TN ratio should be greater than 6

Treatment of Synthetic Wastewater in a Pre-Denitrification Biofilm Reactor Packed with Polyurethane Media