English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The lubrication effectiveness of MoS 2  nanoparticles as an oil additive remains unclear, restricting its application in industry to reduce friction. The goal of this work was to explore the lubrication mechanism of MoS 2  nanoparticles as an oil additive. In this study, the oil film thickness behaviors of MoS 2  nanoparticles in poly-alpha olefin (PAO4) base oil, PAO4 with 3 wt% dispersant (polyisobutyleneamine succinimide, PIBS), and 0W20 engine oil were investigated using an elastohydrodynamic lubrication (EHL) testing machine. Following the EHL tests, the flow patterns around the contact area and the tribofilm covering rate on contact area were studied using optical microscopy to understand the lubrication mechanism. The results indicate that both the dispersant and nanoparticle aggregation significantly affected the oil film thickness. The expected oil film thickness increase in the case of 0.1 wt% MoS 2  in PAO4 base oil was obtained, with an increase from 30 to 60 nm over 15 min at a velocity of 50 mm/s. Flow pattern analysis revealed the formation of particle aggregation on the rolling path when lubricated with 0.1 wt% MoS 2 , which is associated with a tribofilm coverage rate of 41.5% on the contact area. However, an oil film thickness increase and particle aggregation were not observed during the tests with 0.1 wt% MoS 2  blended with 3 wt% PIBS as the dispersant in PAO4 base oil, and for 0.75 wt% MoS 2  in 0W20 engine oil. The results suggest that nanoparticles responsible for tribofilm formation originated from aggregates, but not the well-dispersed nanoparticles in point contact. This understanding should aid the advancement of novel lubricant additive design.

Origin of the tribofilm from MoS2 nanoparticle oil additives: Dependence of oil film thickness on particle aggregation in rolling point contact