English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The stilling basin has been accepted to be the most powerful hydraulic structure for the dissipation of the flow energy. The size and geometry of the stilling basin affect the formation of flow patterns, which can be influential for hydraulic performance of the whole system. The Nazloo Dam in Iran was selected as the study area. The USBR II stilling basin was conducted for four convergence angles ($${5^{{\circ}}, 7.5^{{\circ}}, 10^{{\circ}},}$$5∘,7.5∘,10∘, and $${12.5^{{\circ}}}$$12.5∘). The convergence walls cause the jump to stabilize inside the basin and cause the energy loss to increase in the stilling basin. To simulate the hydraulic jump in the convergence stilling basin conditions in this region, a free surface computational fluid dynamics (CFD) numerical model has been applied. The commercially known software, FLOW-3D$${^\circledR}$$®, was applied to numerically solve the Navier–Stokes equations for solution domains, namely the shout, the stilling basin and the downstream of dam, and to estimate the turbulence flow, the standard k-$${\varepsilon}$$ε and RNG models was used. These models are based on the volume-of-fluid method, and they are capable of simulating the hydraulic jump. The calculated results such as the pressure, the velocities, the flow rate, the surface height air entranced, the kinetics energy, the kinetics energy dissipated, and the Froude number were compared with the scale model data where available. This allowed a comparison for the use of CFD as a cost-effective alternative to physical models. The physical model and CFD model results showed good correlations.

Computational Modeling of the Hydraulic Jump in the Stilling Basin with Convergence Walls Using CFD Codes