English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In order to improve the sidetracking efficiency for the recovery of old wells in the middle and later stage of oilfield, an improved 3.5° single-bend positive displacement mud motor (PDM) is designed. This novel single-bend PDM first uses the structure of 3.5° large angle PDM + cushion block, which can meet the sidetracking requirements of high build-up rate and short directional section in large curvature short-radius sidetracking wells and can significantly improve the build-up ability. Furthermore, based on the mechanical analysis and finite element numerical simulation, its parameter optimization is carried out. The optimal main parameters are determined as follows: the structural bending angle is 3.5°, the outer diameter is 95 mm, the height of the cushion block is 14 mm, the distance between the cushion block and the bending point is 120 mm, the minimum curvature radius is 35.50 m, and the weight-on-bit (WOB) should be less than 30kN. The initial section build-up rate of directional sidetracking can be increased up to 52.67°/30 m ~ 53.29°/30 m. The research results have been applied in Tahe oilfield. It proves that 3.5° single-bend PDM can sidetrack successfully at one time and increase deviation, and the overall angle change rate of bottom hole can reach 45.00°/30 m, which can meet the requirements of short-radius sidetracking with curvature radius of 40 m. The successful application of open-hole sidetracking technology with 3.5° single-bend PDM is of great significance to the production increase and efficiency improvement of old oilfields.

An improved 3.5° single-bend positive displacement mud motor and its parameter optimization for deep short-radius open-hole sidetracking