English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Two modeling approaches are commonly utilized for simulating flow in fractured formations: the discrete fracture network (DFN) approach and the stochastic continuum (SC) approach. Although the DFN approach is the most accurate, it has computational and memory constraints. The SC approach ensures fast processing but results in system over-homogenization. The fracture continuum (FC) approach arises as an integrated technique that incorporates the merits of both approaches. The main objective of this research is to develop a computationally efficient technique based on the FC approach to simulate the radial groundwater flow towards wells through two-dimensional fractured media under both steady and transient conditions. A stochastic generation of the DFN is performed in a Monte Carlo framework taking into account wells positioning. The DFN flow system is solved by applying the mass balance equation at fracture intersections. Fracture segments are mapped onto grids of 1 × 1 m and 5 × 5 m resolution as conductivity and specific storage cells. The grid flow problem is solved via MODFLOW. Flow and head discrepancies between the proposed technique and the DFN approach (reference solution) are assessed in steady and transient conditions. A grid-conductivity correction is needed to preserve the DFN flow in the presence of wells. A porosity estimation is proposed to identify the grid-pressure transient response. Promising flow and head results are observed for fine and coarse grid models. Some of the studied cases show large discrepancies in the maximum drawdown obtained on the coarse grid model. Accordingly, a new technique is proposed to handle such discrepancies and is found efficient in transient simulations (e.g., 11% and 26.12% discrepancies are minimized to − 0.93% and − 1.03% for two studied cases). The adopted mapping technique is found efficient when the interest is to estimate the average drawdown over an aquifer as correlation coefficients of 0.89 and 0.97 are found for the coarse and fine grid models, respectively when compared to the DFN model. However, the technique has limitations in estimating the drawdown at locations of wells.

Modeling radial groundwater flow in fractured media using fracture continuum approach