English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Austenitic Cr–Ni stainless-type 301LN steel was subjected to a double-reversion annealing (DRA) treatment to develop bulk grain-refined microstructures. The tensile properties and formability of the DRA structures were determined by high-speed tensile and Erichsen cupping tests at a strain rate of 1.5 s −1  (50 mm s −1 ) and compared with those of coarse-grained steel. Detailed microstructural features of the DRA structures were characterized using the electron backscatter diffraction technique and X-ray diffraction analysis. The DRA structures achieved by annealing for 1 second at 800 °C and 900 °C exhibited a superior combination of yield (~ 950 and 770 MPa, respectively) and tensile (~ 1050 and 950 MPa, respectively) strengths and ductility (~ 35 and 40 pct, respectively, as well as reasonable Erichsen index values under high-speed biaxial strain. Due to adiabatic heating, the DRA structures had higher austenite stability during high-speed stretch forming,  i.e. , were less prone to strain-induced martensitic transformation. The finite-element method (FEM) was used to conduct coupled field thermomechanical analyses of the high-speed deformation processes for the coarse-grained and DRA structures. Comparison of the FEM analyses with the experimental results revealed a considerable influence (~ 20 pct) of martensitic transformation on the adiabatic temperature rise. The balance of the yield strength and Erichsen index value of the developed nanograined microstructure is comparable to that of coarse-grained commercial steel.

High-Speed Erichsen Testing of Grain-Refined 301LN Austenitic Stainless Steel Processed by Double-Reversion Annealing