English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

Further development of high chromium cast irons (HCCI) is based on tailoring the microstructure, necessitating an accurate control over the phase transformation and carbide precipitation temperatures and can be achieved by thermal treatments (TT). To understand the underlying mechanisms controlling the transformation kinetics during the different stages of the TT, it is imperative to adjust the TT parameters to have information of the transformations occurring during non-thermal and isothermal heating cycles, since proper selection of the TT parameters ensures the optimum use of the alloying elements. In this work, the boundaries of the phase transformations for a HCCI containing 26 wt pct Cr for different cooling rates (continuous cooling transformation, CCT, diagram) were established by applying dilatometric measurements. Based on the CCT diagram, a temperature-time-transformation (TTT) diagram was constructed by isothermally holding the samples until complete phase transformation. For determining the initiation and finishing of the transformation, the lever rule assisted by derivatives was applied. The phases present after transformation were determined by combining X-ray diffraction (XRD) and metallographic characterization using optical microscopy (OM) and scanning electron microscopy (SEM). Finally, the data obtained from the dilatometer was experimentally verified by isothermally heat treating some samples using laboratory furnaces. The transformed phase fraction from OM and SEM images was then correlated to the fraction obtained from the TTT diagram.

Quantification of the Phase Transformation Kinetics in High Chromium Cast Irons Using Dilatometry and Metallographic Techniques