English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Biaxial creep tests on HANA-4 tubes, Nb-added Zircaloy-4 were conducted using internal pressurization of closed-end tubes to investigate the rate-controlling mechanisms over a range of hoop stresses, \( 8.38 \times 10^{ - 5} E - 2.87 \times 10^{ - 3} E \), at three different temperatures 673 K, 723 K, and 773 K (400 °C, 450 °C, and 500 °C). The mechanistic creep parameters such as stress exponent (n) and activation energy (Q C) were then determined from steady-state creep rates. Based on the variance in stress exponent with respect to the applied stress, three regimes have been identified: a stress exponent close to 1 at low stresses that increased to 3 at the intermediate stresses, which became 4.5 at high stresses. An activation energy value of 226 kJ/mol was evaluated for the n = 3 and n = 4.5 regimes, which lies close to the activation energy for self-diffusion (Q L) in α-Zr alloys. Further, TEM analyses of crept microstructures and comparison of experimental results with standard models were undertaken to find out the rate-controlling mechanisms. Coble creep, climbing of dislocations to bypass β-Nb precipitates, and dynamic recovery by edge dislocation climb are proposed as the rate-controlling mechanisms in the n = 1, n = 3, and n = 4.5 regimes of HANA-4, respectively.

Coble, Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding