English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

New thermoplastic polyurethane elastomers (TPUs) were obtained by a one-step melt polyaddition from 30, 45 and 60 mol% aliphatic polycarbonate diol of Mn = 2000 g mol−1 (Desmophen® C2200, Bayer), 1,1′-methanediylbis(4-isocyanatocyclohexane) (HMDI) or 1,6-diisocyanatohexane (HDI) and 2,2′-[sulfanediylbis(benzene-1,4-diyloxy)]diethanol (acting as a chain extender). The TPUs were examined by FTIR, UV–Vis, atomic force microscopy, X-ray diffraction analysis, differential scanning calorimetry, thermogravimetry (TG) and TG–FTIR. Moreover, their Shore A/D hardness, tensile, adhesive and optical properties were determined. The obtained TPUs were transparent or opaque high molar mass materials, showing amorphous or partially crystalline structures. The HDI-based TPUs exhibited lower glass-transition temperatures than those based on HMDI (from −35 to −31 °C vs. from −20 to 1 °C) as well as a higher degree of microphase separation. The TPUs were stable up to 262–272 °C, taking into account the temperature of 1 % mass loss, with somewhat higher values shown by those from HDI. They decomposed in two stages. The main volatile products of the hard-segment decomposition were carbon dioxide, water and carbonyl sulfide, while aliphatic ethers, aldehydes and unsaturated alcohols, as well as carbon dioxide, originated from the soft-segment decomposition. The synthesized TPUs, with hardness in the range of 80–90°Sh A, possessed a good tensile strength (33.0–38.7 MPa), similar to that of the commercial biodurable medical grade TPU ChronoFlex® AL 80A (37.9 MPa), prepared from aliphatic polycarbonate diol, HMDI and butane-1,4-diol.

Aliphatic polycarbonate-based thermoplastic polyurethane elastomers containing diphenyl sulfide units