Open AccessThe Effect of Parallel-hole Collimator Material on Image and Functional Parameters in SPECT Imaging: A SIMIND Monte Carlo Study
Author(s) -
Ahmadreza Azarm,
Jalil Pirayesh Islamian,
Babak Moeini,
Esmaeil Gharepapagh
Publication year - 2015
Publication title -
world journal of nuclear medicine
Language(s) - English
Resource type - Journals
eISSN - 1607-3312
pISSN - 1450-1147
DOI - 10.4103/1450-1147.163242
Subject(s) - collimator , imaging phantom , image resolution , spect imaging , monte carlo method , physics , single photon emission computed tomography , full width at half maximum , nuclear medicine , optics , image quality , medical imaging , medical physics , medicine , computer science , radiology , computer vision , image (mathematics) , mathematics , statistics
The collimator in single-photon emission computed tomography (SPECT) is a critical component of the imaging system and plays an impressive role in the imaging quality. In this study, the effect of the collimator material on the radioisotopic image and its functional parameters was studied. The simulating medical imaging nuclear detectors (SIMIND) Monte Carlo program was used to simulate a Siemens E.CAM SPECT (Siemens Medical Solutions, Erlangen, Germany) system equipped with a low-energy high-resolution (LEHR) collimator. The simulation and experimental data from the SPECT imaging modality using (99m)Tc were obtained on a point source and Jaszczak phantom. Seventeen high atomic number materials were considered as LEHR collimator materials. In order to determine the effect of the collimator material on the image and functional parameters, the energy resolution, spatial resolution, contrast, and collimator characteristics parameters such as septal penetration and scatter-to-primary ratio were investigated. Energy spectra profiles, full width at half maximums (FWHMs) (mm) of the point spread function (PSF) curves, system sensitivity, and contrast of cold spheres of the Jaszczak phantom for the simulated and experiment systems have acceptability superimposed. The results of FWHM and energy resolution for the 17 collimators showed that the collimator made of 98% lead and 2% antimony could provide the best FWHM and energy resolution, 7.68 mm and 9.87%, respectively. The LEHR collimator with 98% lead and 2% antimony offers the best resolution and contrast when compared to other high atomic number metals and alloys.