Open AccessPerbandingan kekuatan kompresi struktur laminasi dan prepreg dari komposit jute-epoxy
Author(s) -
Gede Adi Yoga Saputra,
I Made Jiwa Astika,
I.D.G Ary Subagia
Publication year - 2022
Publication title -
jurnal energi dan manufaktur/jurnal energi dan manufaktur
Language(s) - English
Resource type - Journals
eISSN - 2541-5328
pISSN - 2302-5255
DOI - 10.24843/jem.2021.v14.i01.p05
Subject(s) - materials science , composite material , composite number , epoxy , composite laminates , compression molding , compression (physics) , fiber , molding (decorative) , compression test , modulus , transfer molding , mold
This experiment has conducted to investigate mechanical properties of pipe structure performed by natural composite. The composite has been fabricated in two modes such laminate and prepreg reinforcement by vacuum injection molding. Compression test have been conducted for each variety in five times repeating. The specimen was made and test according to the ASTM D2166M-16 standard. The purpose of this research is to investigate and comparation of compression strength of laminate and prepreg structure composite pipe. The test result shows that laminates mode of pipe composite using the woven jute fabric has a lower in compression strength about 711.34 [MPa] compared to prepreg mode about 1184.9 [MPa]. In addition, the young modulus of the laminate composites has about 5.37 [GPa], and the prepreg mode has value about 6. 885 [GPa]. This value indicates that the prepreg mode more strength than the laminates mode in composite pipe due to the prepreg in tangential direction the compression energy absorbed by the fiber absolutely.