Premium
In Vitro Evaluation of Platelet/Biomaterial Interactions in an Epifluorescent Video Microscopy Combined with a Parallel Plate Flow Cell
Author(s) -
Kawagoishi Nobuchika,
Nojiri Chisato,
Senshu Kazuhisa,
Kido Takayuki,
Nagai Hirofumi,
Kanamori Toshiyuki,
Sakai Kiyotaka,
Koyanagi Hitoshi,
Akutsu Tetsuzo
Publication year - 1994
Publication title -
artificial organs
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.684
H-Index - 76
eISSN - 1525-1594
pISSN - 0160-564X
DOI - 10.1111/j.1525-1594.1994.tb03383.x
Subject(s) - biomaterial , biomedical engineering , platelet , whole blood , video microscopy , materials science , polymer , chemistry , chromatography , analytical chemistry (journal) , nanotechnology , composite material , surgery , immunology , microbiology and biotechnology , medicine , biology
Abstract: Suitable evaluation systems are critical for ranking various biomaterials in order to develop a method to design and synthesize nonthrombogenic biomaterials. We have recently developed an in vitro test system to evaluate platelet/biomaterial interactions in whole blood. The system consists of a parallel plate flow cell and epifluorescent video microscopy (EVM). A glass coverslip coated with a polymer was incorporated into the flow cell, and blood was perfused using a syringe pump via a polymer–coated PVC tubing connected to the flow cell. Whole human blood was anticoagulated with heparin (2 U/ml), and the platelets were labeled with the fluorescent dye mepacrine (5 μM). This system permitted real–time and dynamic observations of platelet/biomaterial interactions in whole blood under a defined flow condition. In order to evaluate the feasibility of this system, two different segmented polyether–polyurethanes (SPEUs), PU–PTMG(650) and PU–PTMG(2000), were chosen as test polymers. Surface characteristics verified with electron spectroscopy for chemical analysis (ESCA) and contact angle measurements showed similar results in both SPEUs. Blood was perfused at a wall shear rate of 200 s –1 for 20 min. Excitation light was applied for 2 s at 1 min intervals. The real–time image was then analyzed at each time point for the percentage of surface area of platelet coverage. Plasma β–thromboglobulin (β–TG) levels were also measured before and after each run. PU–PTMG(650) showed a significantly higher number of adhered platelets than PU–PTMG(2000) at each time point. β–TG levels of PU–PTMG(650) were also higher than those of PU–PTMG(2000), which is comparable to the results of EVM. Thus, this EVM system has been proven to be an excellent and highly sensitive in vitro analytical method for evaluating platelet/biomaterial interactions.