Hot metal pretreatment by powder injection of lime‐based reagents

A mathematical model earlier proposed has been improved to predict the kinetics of multicomponent reactions in the hot metal pretreatment through the injection of reactive fluxes. It is assumed that there are two reaction zones along the flux injection operation: a transitory reaction between the rising particles and the bulk metal, and the permanent reaction between the metal and the top slag. A criterion to estimate the fraction of solids which will react with molten iron in a three‐phase jet (gas‐solid‐liquid) was considered; this fraction of solids carries out the transitory reaction. The model also takes into account the thermodynamic changes produced in the metal and slag due to the chemical reactions. Calculated results of the model are in good agreement with experimental results for the desulfurization of hot metal through the injection of CaO‐SiO 2 ‐CaF 2 ‐FeO‐Na 2 O reagents at 1400 ‐ 1450 °C. Two kinds of hot metal were tested, one with a low carbon mass content of 3 % and the other with a high carbon mass content of 4.5 %.