English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

It is presented an alternative procedure for preparation of biodiesel samples for elemental determination by inductively coupled plasma optical emission spectrometry (ICP OES), based on the sample (10% m/v) emulsion formation with formic acid (15% v/v) and Triton X-100 (0.1% m/v). These concentrations were optimized and the stability of emulsified aqueous standards and samples was found to be of at least 3 h. Experimental conditions (1500 W of RF power and 0.5 L min-1 of Ar nebulizer flow rate) were optimized from those recommended by the equipment manufacturer, with a solution containing 10 mg L-1 of each analyte prepared with mineral oil in the same conditions of the emulsion. Matrix effects were investigated by observing the slopes of analyte addition curves for different biodiesel samples. Results showed that external calibration with inorganic aqueous standard solutions in the emulsion medium should be used. Limits of detection obtained (in mg kg-1) were 0.121, 0.008, 0.006, 0.001, 0.006, 0.071, 0.241 and 0.024 for Ca, Cu, Fe, Mn, Mg, Na, K and Si, respectively. The accuracy of the procedure for Ca, Mg, K and Na was assessed by the analysis of a multi-element standards B100 biodiesel (Conostan) and the recoveries ranged from 91 to 107%. The proposed procedure used low toxicity reagents and showed to be a simple and straightforward alternative of sample preparation for metal determination in biodiesel by ICP OES with limits of detection adequate for those analyses.

journal of the brazilian chemical society

An Easy and Fast Procedure for the Determination of Ca, Cu, Fe, Mn, Mg, Na, K and Si in Biodiesel by ICP OES Using Emulsification as Sample Preparation Strategy