English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Wear simulation of total-hip arthroplasty (THA) involves hip biomechanics, tribology, bearing designs and cup wear-patterns. This is the first demonstration of cup edge-loading using the “Inverted-cup” test mode. Benefits included, (i) clinically relevant wear-patterns, and (ii) cup inclinations varying from ideal to edge-loaded during each 1-s simulator cycle. The 60 mm head and cup bearings in metal-on-metal (MOM) hip joints showed run-in and steady-state wear phases to 10-million cycles (Mc). MOM edge-wear was not unduly high at 1.7 mm3/Mc overall, this 3-fold higher than 60 mm MOM study without edge-loading. One MOM outlier averaged 2.7 mm3/Mc, this representing the break-away wear (BAW) phenomena. A surprising result was that cups contributed 75–93% of total wear. The most disturbing conclusion from review of laboratory studies was that MOM wear-rates varied 1 to >30 mm3/Mc for reasons not understood. These data suggested a new hypothesis, that MOM bearings were very sensitive to external stimuli, be they simulator artifact or patient related

Acetabular Cups in 60 mm Metal-on-Metal Bearings Subjected to Dynamic Edge-Loading with 70° Peak-Inclination in 10-Million Cycle Simulator Study