English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this research, plasma electrolytic oxidation (PEO) coatings were prepared on 7075 Al alloy in a silicate-based solution with Na2MoO4 additive using a unipolar waveform at constant current density. The coatings displayed micro-pores, micro-cracks, pancake-like and crater-like features, and also solidified molten oxide particles on the surface. The coatings were majorly composed of Al2O3 (γ, δ, and α), SiO2 (amorphous), and MoO3 phases, which confirms the incorporation of molybdenum in the case of additive-containing coatings. Molybdenum species were transported through cracks, channels, and micropores, as the ready access pathways into the coating and partly sealed the coating pores. The EIS technique was used to evaluate the long-term corrosion performance of the coatings up to 168 h of immersion in 3.5 wt.% NaCl solution. The results showed that the barrier action of the PEO coatings was highly enhanced by adding Na2MoO4 due to the higher resistance that alumina achieved to chlorine absorption and also its higher stability by the incorporation of MoO3. The coating formed in the presence of 5 g L−1 Na2MoO4 showed the highest thickness and the lowest porosity percent (15.15%), which provided the highest corrosion performance at long immersion times.

Effect of Molybdate on Corrosion Performance of Oxide Coating Produced on 7075 Al Alloy Using PEO