English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The challenges associated with unconventional reservoirs are related to their intrinsic nature: extremely low porosity and permeability. Combinations of horizontal wells and multistage hydraulic fracturing techniques have been developed to overcome the production obstacles and unlock the vast amount of oil in place in such formations. However, oil production still exhibits a sharp decline within the first 2 years after the stimulation, leading to an oil recovery of less than 15%. Thus, enhanced oil recovery methods need to be investigated to further increase the production rates and the recovery. In this study, laboratory experiments and numerical simulations were conducted to evaluate the performance of the CO 2  foam huff and puff process and its impacts on oil recovery in tight oil formations. More specifically, the foam half-life was measured as a function of surfactant concentration and followed by the foam drainage ratio and its rheological properties in the subsequent tests. Reservoir simulations were conducted using the lab data and the field data collected from Cardium formation. Sensitivity analyses were finally carried out to investigate the effects of controlling variables on the CO 2  foam performance. Experimental results revealed that the optimal surfactant concentration was found to be 0.2%, which is the critical micelle concentration point. Simulation results show that CO 2  foam huff and puff can increase the oil recovery by more than 11% compared to that of the primary production. Moreover, sensitivity analyses show that the production time, injection time, and soaking time are the main effecting parameters, while the injection rate and the incremental injection rate are less important.

Performance of CO2 Foam Huff and Puff in Tight Oil Reservoirs