English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

In this study, the effects of hot forging and heat treatment (quenching and tempering) of cast Cr alloy steel on the microstructures and mechanical properties were investigated. The hot forging was performed at a compressive ratio 0.5 at 1,250 oC. The heat treatment process was quenching (860 oC for 2 hours and water quenching) and tempering (655 oC for 2 hours and air cooling). The microstructures of the hot forged specimen showed bainite, pearlite and ferrite mixed phases with high tensile strength, but showed low fracture toughness. The heat treated specimens after hot forging showed tempered martensite microstructure and high fracture toughness but relatively low yield and tensile strengths. After tensile and fracture toughness tests, the cast and the hot forged specimens both showed cleavage fracture surfaces, which occurred between lamellar structures. However, the heat treated specimen had a ductile fracture surface with dimple shaped fractures. From these results, we could conclude that the high fracture toughness was caused not by the cleavage fracture mode in the pearlite and bainite phases, but delayed fracture due to a ductile fracture mode in the tempered martensite phase. (Received September 11, 2017; Accepted December 27, 2017)

Effect of Hot Forging and Heat Treatment on the Microstructure and Mechanical Properties of Cr Steel