English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Determination of lead in waste water using cyclic voltammetry by platinum wire electrode has  been carried out. The cyclic voltammetry method was performed in a three electrodes system using  platinum wire as a working electrode, an Ag/AgCl (saturated KCl) as reference electrode and platinum  plate as the counter electrode. PGSTAT 100 N 100 V/250 mA type (Metrohm Autolab) was used for  electroanalysis measurements. Electroanalysis of lead in waste water was performed in 0.1 M KClas  an electrolyte. From this research showed that the developed electroanalysis lead in waste water using  platinum wire electrode are accurate, precise, reproducible and inexpensive with acceptable correlation  of determination (R 2 = 0.999), LOD = 0.9029 mg/L , LOQ = 3.0098 mg/L and recovery = 100,67%.  The methods can be used for the analysis of lead in waste water. This method is simplicity of sample  preparation and use of low cost reagents are the additional benefit.

DETERMINATION OF LEAD IN WASTE WATER USING CYCLIC VOLTAMMETRY BY PLATINUM WIRE ELECTRODE