English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Thermodynamic analysis was performed to obtain the relation between the carbon content at the BOF endpoint and the dissolved oxygen content in liquid steel and the (FeO + MnO) content in the slag with the help of thermodynamic calculation software FactSage. It finds that both the [O] and (FeO + MnO) content increase with decreasing the carbon content at the BOF endpoint and the increasing rate is larger when the carbon content is lower. In addition, in the case of the higher temperature at the BOF endpoint the [O] in liquid steel increase and the (FeO + MnO) in the slag increase as well. The consumption of O 2  for decarbonization at the BOF endpoint is much more than that in RH degasser since the majority of the blowing O 2  at the BOF endpoint will produce FeO into the slag, thus it increase the metal loss and deteriorate the steel cleanness during the consequent refining process. As a result, the carbon content at the BOF endpoint should be properly increased within the RH decarbonization ability. At last, industrial trials were carried out and confirmed that total oxygen consumption decrease obviously and the (FeO + MnO) of final BOF slag decline as well with increasing carbon content at BOF endpoint from 0.042% to 0.081%. In addition, it almost does not slow down the RH process and the carbon content in final steel all met the demand of the ultra-low carbon steel. In addition, mechanical properties of IF steel with higher carbon content at the endpoint of BOF are almost all more superior to those of heat with lower carbon content at BOF endpoint.

Thermodynamics and Industrial Trial on Increasing the Carbon Content at the BOF Endpoint to Produce Ultra-Low Carbon IF Steel by BOF-RH-CSP Process