English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

As a result of energy production processes, the power industry is the largest source of CO2 emissions in Poland. Emissions from the energy sector accounted for 52.37% (162 689.57 kt) of the total emissions in 2015, which was estimated at 310.64 million tons of CO2. In recent years, the tightening of regulations on the use of renewable energy sources has resulted in an increased amount of biomass used in the professional energy industry. This is due to the fact that the CO2 emissions from biomass combustion are not included in the total emissions from the combustion of fuels, resulting in the zero- emission factor for biomass. At the same time, according to the hierarchy of waste management methods, recycling is the preferred option for the management of by-products generated during energy production. The fly ashes resulting from the biomass combustion in pulverized boilers (which, due to their chemical composition, can be classified as silicate ash) were subjected to analysis. These ashes can be classified as waste 10 01 17 - fly ash from co-firing other than mentioned in 10 01 16 according to the Regulation of the Minister of the Environment of December 9, 2014 on waste catalogues. The maximum theoretical carbon dioxide binding capacity for the analyzed fly ashes resulting from the co-combustion of biomass is 8.03%. The phase composition analysis of the fly ashes subjected to carbonation process has shown, in addition to the components identified in pure fly ash samples (SiO2, mullite), the presence of calcium carbonate − calcite − the primary product of the carbonation process, as indicated by the results of both X-ray and thermogravimetric analysis.The degree of carbonation has been determined based on the analysis of the results of the phase composition of fly ash resulting from the co-firing of biomass and bituminous coal. The calculated degree of carbonation amounted to 1.51%. The carbonation process is also confirmed by the lowered pH of the water extracts, decreasing from 11.96 for pure ashes to 8.7 for CO2 treated fly ashes. In addition, the carbonation process has reduced the leaching of pollutants, most notably chlorides, sulphates, and potassium.

The mineral sequestration of CO2 with the use of fly ash from the co-combustion of coal and biomass