English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Since 1986, cardiac arrhythmias have been successfully treated by destroying the underlying arrhythmogenic substrate with radiofrequency energy (radiofrequency ablation). The aim of this study was to develop a model for radiofrequency ablation enabling evaluation of the temperature distribution within cardiac tissue and the influence of electrode tissue contact. The model describes a 7F electrode, 4 mm in length and positioned perpendicular to the tissue. Heat convection within the tissue and heat lost via the blood was taken into account. Simulation of constant tissue exposure to 4 W resulted in a temperature increase of 35 degrees C after 10 sec. The temperature increase in the depths was less steep, but constant, and exceeded the electrode temperature at depths of 1 mm after 40 sec, 2 mm after 100 sec, and 3 mm after 200 sec. Electrode tissue contact proved to have a great influence on tissue temperature. Poor contact resulted in a temperature rise of only 0.68 degree C with a maximum of 50 W, whereas with ideal contact, 4 W sufficed to achieve a chosen setpoint of 70 degrees C. The model was validated in an in vitro setup using ventricular tissue from the pig. A strong correlation was found between simulated heating efficiency during temperature-controlled ablations under different contact conditions, and the respective measured values in the in vitro setup with a correlation coefficient of 0.97.

Entwicklung und Validierung eines Modells zur Hochfrequenzablation - Development and Validation of a Model for Radiofrequency Ablation