English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

The initial stability of 6 different hemispherical press-fit titanium acetabular cups was investigated by lever-out tests using a foam model. Each cup was implanted in a standardised manner into machined PVC-foam blocks with an underreaming of 1/2/3 mm, and levered out 5 times. A computer recorded the load-displacement curves. Both insertion forces and lever-out forces increased with increasing press-fit from 1 to 2 mm. With underreaming of 2 mm, insertion forces varied between 9 and 34 Nm, and lever-out torques between 13 and 23 Nm. The cup made up of multi-layer irregular titanium wire mesh had the highest initial stability of all the cups tested. 3 mm underreaming was associated with insertion difficulties, so that lever-out is difficult to compare with that with 1 and 2 mm. The amount of contact on the equatorial rim, where we saw the most attrition after lever-out, is the most important factor for determining the lever-out torque. The quality of the PVC foam blocks, the accuracy of reaming, and the definition of cup insertion are very important parameters for test reproduction. Since the trials were conducted under laboratory conditions, translation of the results to the intraoperative situation should be undertaken only with certain reservations.

biomedizinische technik

Primärstabilität zementfreier Press-fit-Hüftpfannen. In-vitro-Auskippversuche - Initial Stability of Press-fit Acetabular Cups. In vitro Lever-out Trials