English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

In this study, a bronze matrix (90 wt% Cu 10 wt% Sn) was reinforced with Al2O3 particles using mechanical alloying and then produced by a subsequent rapid current sintering technique. The mechanically ball milled bronze powders were reinforced with electroless Ni coated 20 vol.% Al2O3 particles with three different particle sizes of 90, 70, and 50 mu m. Microhardness testing, and scanning electron microscopy were used for the structural characterization of the composites. The tribological behavior of the resultant composites was tested by the ball-on-disk method at 1.0 N applied load with 0.3 m/s sliding speed for determination the wear loss and friction coefficient features against a counterface steel ball. DOT: 10.12693/APhysPolA.123.235

Characteristics Bronze/Al2O3(Ni) Reinforcement Metal Matrix Composite Produced by Current Activated Sintering

Characteristics Bronze/Al₂O₃(Ni) Reinforcement Metal Matrix Composite Produced by Current Activated Sintering