English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

The solidification of liquids having bulk compositions in the high iron region of the ‘Fe 2 O 3 ’-CaO-SiO 2  system having selected CaO/SiO 2  ratios has been investigated. The compositions investigated were selected such that the bulk compositions were within the hematite primary phase field, fully liquid at temperature (1350°C) and pass through the SFC primary phase field on cooling. Specifically, three CaO/SiO 2  ratios (wt/wt) were investigated, 2.78, 3.46 (Nicol S, Jak E, Hayes P. 2019b. Microstructure evolution during controlled solidification of “Fe 2 O 3 ”-CaO-SiO 2  liquids in air. Met. Trans. B. 50:2706–2722) and 4.75 with bulk compositions comprising 69.23, 72.74 and 74.94 wt% Fe 2 O 3  respectively. The phases present and their composition was determined with electron probe microanalysis (EPMA) and X-ray diffraction (XRD). During cooling, four stages of solidification were observed at all three CaO/SiO 2  ratios, and an additional two stages at the highest CaO/SiO 2  ratio. Non-equilibrium phase and liquidus compositions were observed. Significantly, the silico ferrite of calcium phase (SFC) was not observed in any of the samples, although the formation of this phase was anticipated from phase equilibrium considerations.

Effect of the CaO/SiO 2 ratio on the controlled solidification of ‘Fe 2 O 3 ’-CaO-SiO 2 melts in air