English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Tools annual

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Presents the access of premium content as premium feature

Premium Content

Global: Zendy Plus annual

Global: Zendy Free Plan

In this study, the issues of the complex mechanical behavior inside steel wire rope and wear evolution of internal wire at typical contact areas where the fracture of the wire is more likely to occur is considered. First, the fretting parameters of steel wires at typical contact areas were calculated. Then the wear evolution process under tensile loads with different stress ratios was simulated by using the finite element method (FEM) based on the calculated parameters. Finally, the micromorphology and element concentration and distribution of wear scars at typical contact areas were observed. The results demonstrate that (1) the relative displacement value and normal contact stress between the outer layer steel wires of core strand and outer strands are maximum and cause the most severe wear in this area. As the stress ratio decreases from 0.5 to 0.25, the fretting parameters of steel wires increase. (2) The wear evolution process is divided into the running-in stage and stable wear stage, which are characterized by a rapid decline and stabilization of the wear rate, respectively. (3) Compared with other contact areas, the concentration of iron, carbon, and chlorine in the contact area between strands is obviously higher. In addition, strong plastic deformation, severe delamination, and primary and secondary cracks occur in this region, resulting in stress concentration and thus a decrease in the fatigue life of steel wire.

Mechanical and Wear Behavior of Steel Wires in Typical Contact Area under Tension–Tension Fatigue