English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

Natural clinoptilolite (Clin) was modified with iron oxide using three different methods including precipitation, wet-impregnation and ion-exchange and then the modified adsorbent with highest As(V) removal efficiency was encapsulated into Alginate by a simple cross-linking method to obtain Fe-Clin granules. The surface morphology and chemical composition of the Fe-Clin sorbents were characterized by scanning electron microscope and X-ray diffraction analysis. The selected Fe-Clin powders and granules possessed enhanced affinity towards the highly toxic arsenic pollutant in a very short time. Batch adsorption experiments showed that the Fe-Clin adsorbent can be widely used within a wide range of pH (2-9). In addition, to reach a high removal percentage (over 90%) of As(V), the optimum dosage of powder and granule shaped adsorbents was obtained as 0.1 and 0.6 g L −1 , respectively. Both adsorbents could successfully remove As(V) in a very short amount of time as 20 and 30 min in the case of powders and granules, respectively. The maximum adsorption capacity of Fe-Clin granules evaluated by using Langmuir adsorption isotherm was found to be 11.17 mg g −1 . By testing the granules in a circulated fluidized column experiment, it was demonstrated that Fe-Clin granules could remove As(V) up to an acceptable level (93%) within 10 min. This study demonstrates that Fe-Clin granules, obtained by exploiting natural clinoptilolite, iron oxide and alginate, are efficient, sustainable and fairly cheap adsorbents for the removal of arsenate from the aquatic environment in a very short contact time.

Arsenate removal from contaminated water using Fe 2 O 3 -clinoptilolite powder and granule