English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Plus monthly

Global: Zendy Tools annual

Global: Zendy Tools monthly

Global: Zendy Free Plan

The welding of Al and Cu is considered as difficult due to the formation of intermetallic compounds, which cause a brittle joint with increased electrical resistance. This paper investigates etching techniques that were used to contrast the intermetallic compounds for optical microscope analysis. A 0.5 mm AA-1050 sheet was welded to a 0.5 mm SF-Cu sheet in overlap configuration. The cross sections were etched by using 17 different reagents, including common Al-grade 2xxx etchants, Al-bronze etchants, and specific IMC etchants. A complete microstructural characterization, including the formation of intermetallic compounds, is presented. The experimental result showed that a clear distinction of metallurgic structures is possible, thus enabling a more detailed analysis of Al-Cu welds. It was found that etchants #09, #14, and #16 revealed best the four different intermetallic compounds θ-Al2Cu, η-AlCu, ζ-Al3Cu4, and γ-Al4Cu9.

Metallographic Studies of Dissimilar Al-Cu Laser-Welded Joints Using Various Etchants