English (United Kingdom)

https://curated-unify.zendy.io/wp-json/zendy-region/v1/featured_content/oa?rat=en

https://curated-unify.zendy.io/wp-json/zendy-region/v1/highlighted_journal/

Global: Zendy Plus annual

Presents the access of premium content as premium feature

Premium Content

Presents the keyphrase highlighting as premium feature

Keyphrase Highlighting

Presents the summarisation as premium feature

Summarisation

Insights

Presents the pdf analysis as premium feature

PDF Analysis

Presents the zaia usage as premium feature

ZAIA

Global: Zendy Tools annual

Global: Zendy Free Plan

Global: Zendy Tools monthly

Global: Zendy Plus monthly

This work reports a comparative study on different hole making methods, namely conventional drilling, peck drilling and helical milling, for Al 2024-T3/Ti-6Al-4V stacks in aircraft applications. The impacts of different hole making methods with constant or varied machining parameters across the stacked structures have been investigated. The resulting exit burr, hole surface roughness/microstructural change and fatigue behaviour of the machined stacks have been characterized in detail. Results show that the exit burr formation is most severe for conventional drilling and least burr is produced in helical milling coupons. Deploying varying parameters (i.e. optimal parameters for each individual metal layer) across the stacks can effectively reduce the burr formation in conventional drilling and peck drilling. 3D surface morphology shows that Al 2024-T3 hole surface contains multiple scratches and trenches, while Ti-6Al-4V hole surface features regular feed marks. Helical milling leads to the highest Al 2024-T3 hole surface roughness, which can be attributed to the abrasion caused by the evacuated Ti-6Al-4V chips. Sub-surface microstructural analysis shows that the Ti-6Al-4V layer is more prone to machining-induced microstructural change (i.e. white layer formation and/or grain plastic deformation along machining direction). The relatively low fatigue performance of stacks produced by conventional drilling and peck drilling with constant parameters can be related to the presence of the brittle Ti-6Al-4V white layer in these coupons. Deploying varied parameters across stacks in conventional drilling and peck drilling can effectively eliminate Ti-6Al-4V white layer formation and improve the stacks fatigue life by 72% and 38%, respectively. Helical milling leads to the longest stack fatigue life (~ 100% and 40% greater than conventional drilling and peck drilling, respectively).

the international journal of advanced manufacturing technology/international journal, advanced manufacturing technology

Investigating hole making performance of Al 2024-T3/Ti-6Al-4V alloy stacks: A comparative study of conventional drilling, peck drilling and helical milling